Relief valve G 1-1/4", 2 to 12 bar

Advantages:
•compact design,
•self-contained gas-tight design,
•optimised with high Kv values,
•can be adjusted externally without disassembly and without special tools,
•wide pressure range coverable with a valve,
•can be used for gas-forming and liquid media

Application:
Relief valves are used in closed circuits to protect pumps from overload. When the adjustable reaction pressure is exceeded, the valve opens in proportion to the overpressure and thus slowly releases pressure. The relief valve is designed to be open for an extended time. As a matter of principle, one must assume that the pressure in the system can exceed the reaction pressure set on the relief valve.
Safety valves have a completely different response characteristic. In the event that the reaction pressure is exceeded by more than 10%, they open almost instantaneously and release all pressure at once. When the pressure comes down to 10-20% below the set reaction pressure, the valve closes again.
Although this function does ensure that the set pressure will not be exceeded by more than 10%, the system will be heavily stressed by the non-proportional opening behaviour.

Version:
Using an Allen key, the relief valves can be adjusted under operating conditions, and without releasing any medium into the surroundings. You are not compensated against back pressure.

Materials:
Body: Gunmetal / brass, spring: stainless steel, seal: FKM (set pressure 12 to 20 bar: PTFE)

Temperature range:
-20 to +200 °C

Media:
Compressed air and other aggressive, non-flammable gases, water and other neutral, non-toxic fluids, mineral oils

Optional:
Body made of stainless steel 1.4401/1.4408 -ES

Material	Red bronze / brass
reaction pressure [bar]	2 - 12
DN [mm]	32
Thread	G 1-1/4"
Kv value (water)* [l/min]	103 - 83
h [mm]	45
H [mm]	118
L [mm]	45
SW [mm]	52

{{ $t('shop.all.gewicht') }}	1,8 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	84814010
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}